Pagina 3 di 3 PrimoPrimo 123
Mostra risultati da 21 a 25 di 25

Discussione: Impossibile formattare SD, tentativo di recupero con testdisk

  1. #21
    Data registrazione
    Mar 2010
    Sesso
    Boh
    Località
    Italia
    Messaggi
    829
    Grazie dati 
    116
    Grazie ricevuti 
    189
    Ringraziato in
    145 post

    Riferimento: Impossibile formattare SD, tentativo di recupero con testdisk

    In effetti si l'ho installato con wubi, non ho proprio ubuntu ma xubuntu (credo che la situazione non cambi)
    prover˛ appena possibile con la live... (di ubuntu)

    Rispondi citando Rispondi citando

  2. # ADS
    Google Adsense Circuito Adsense
    Data registrazione
    da sempre
    Località
    mondo google
    Messaggi
    molti
     
  3. #22
    Data registrazione
    Mar 2010
    Sesso
    Boh
    Località
    Italia
    Messaggi
    829
    Grazie dati 
    116
    Grazie ricevuti 
    189
    Ringraziato in
    145 post

    Riferimento: Impossibile formattare SD, tentativo di recupero con testdisk

    OK ora mi trovo con installato solo Lubuntu!! sull'HD
    Ho riprovato a fare tutti i passaggi ed ho ottenuto gli stessi risultati!! non va...

    Rispondi citando Rispondi citando

  4. #23
    Data registrazione
    Aug 2010
    Sesso
    Uomo
    Messaggi
    341
    Grazie dati 
    41
    Grazie ricevuti 
    176
    Ringraziato in
    131 post

    Riferimento: Impossibile formattare SD, tentativo di recupero con testdisk

    il discorso che e' quasi impossible che le modifiche non vengano scritte a meno che non sia danneggiata , ma non vedo nulla che lo indichi, finora hai utilizzato il lettore interno?se si, vediamo se non e' quello il problema.Utilizza un lettore esterno,la schedina dovrebbe vederla come sd* siccome le misure potrebbero variare, posta i vari dmesg,fdisk -l -u ,sfdisk -d

    Rispondi citando Rispondi citando

  5. #24
    Data registrazione
    Mar 2010
    Sesso
    Boh
    Località
    Italia
    Messaggi
    829
    Grazie dati 
    116
    Grazie ricevuti 
    189
    Ringraziato in
    145 post

    Riferimento: Impossibile formattare SD, tentativo di recupero con testdisk

    Ecco, ho preso un lettore card della stessa marca della scheda Transcend...
    sembra da quel che leggo che la scheda in realtÓ sia di meno di 2gb...
    Comunque non si risolve...

     

    Attenzione: la partizione estesa non inizia al limite di un cilindro.
    DOS e Linux interpreteranno i contenuti in modo diverso.
    # partition table of /dev/sda
    unit: sectors

    /dev/sda1 : start= 2048, size=114137088, Id=83
    /dev/sda2 : start=114141182, size= 3067906, Id= 5
    /dev/sda3 : start= 0, size= 0, Id= 0
    /dev/sda4 : start= 0, size= 0, Id= 0
    /dev/sda5 : start=114141184, size= 3067904, Id=82
    # partition table of /dev/mmcblk0
    unit: sectors

    /dev/mmcblk0p1 : start= 63, size= 2011905, Id= 6
    /dev/mmcblk0p2 : start= 0, size= 0, Id= 0
    /dev/mmcblk0p3 : start= 0, size= 0, Id= 0
    /dev/mmcblk0p4 : start= 0, size= 0, Id= 0
    mauro@mauro-AMILO-A1650G:~$ sudo sfdisk -d
    Attenzione: la partizione estesa non inizia al limite di un cilindro.
    DOS e Linux interpreteranno i contenuti in modo diverso.
    # partition table of /dev/sda
    unit: sectors

    /dev/sda1 : start= 2048, size=114137088, Id=83
    /dev/sda2 : start=114141182, size= 3067906, Id= 5
    /dev/sda3 : start= 0, size= 0, Id= 0
    /dev/sda4 : start= 0, size= 0, Id= 0
    /dev/sda5 : start=114141184, size= 3067904, Id=82
    # partition table of /dev/sdb
    unit: sectors

    /dev/sdb1 : start= 247, size= 3994377, Id= 6
    /dev/sdb2 : start= 0, size= 0, Id= 0
    /dev/sdb3 : start= 0, size= 0, Id= 0
    /dev/sdb4 : start= 0, size= 0, Id= 0
     
    Disco /dev/sda: 60.0 GB, 60011642880 byte
    255 testine, 63 settori/tracce, 7296 cilindri
    UnitÓ = cilindri di 16065 * 512 = 8225280 byte
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Identificativo disco: 0x00023d34

    Dispositivo Boot Start End Blocks Id System
    /dev/sda1 1 7105 57068544 83 Linux
    /dev/sda2 7105 7296 1533953 5 Esteso
    /dev/sda5 7105 7296 1533952 82 Linux swap / Solaris

    Disco /dev/sdb: 1551 MB, 1551892480 byte
    47 testine, 46 settori/tracce, 1401 cilindri
    UnitÓ = cilindri di 2162 * 512 = 1106944 byte
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Identificativo disco: 0x00000000

    Dispositivo Boot Start End Blocks Id System
    /dev/sdb1 1 1848 1997188+ 6 FAT16
     


    Usage:
    fdisk [options] <disk> change partition table
    fdisk [options] -l <disk> list partition table(s)
    fdisk -s <partition> give partition size(s) in blocks

    Options:
    -b <size> sector size (512, 1024, 2048 or 4096)
    -c switch off DOS-compatible mode
    -h print help
    -u <size> give sizes in sectors instead of cylinders
    -v print version
    -C <number> specify the number of cylinders
    -H <number> specify the number of heads
    -S <number> specify the number of sectors per track
     
    WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
    switch off the mode (command 'c') and change display units to
    sectors (command 'u').

    Comando (m per richiamare la guida): d
    Partizione selezionata 1

    Comando (m per richiamare la guida): n
    Azione comando
    e estesa
    p partizione primaria (1-4)
    p
    Numero della partizione (1-4): 1
    Primo cilindro (1-1401, predefinito 1): 1
    Last cilindro, +cilindri or +size{K,M,G} (1-1401, predefinito 1401): 1401

    Comando (m per richiamare la guida): t
    Partizione selezionata 1
    Codice esadecimale (digitare L per elencare i codici): L

    0 Vuoto 24 NEC DOS 81 Minix / vecchio bf Solaris
    1 FAT12 39 Plan 9 82 Linux swap / So c1 DRDOS/sec (FAT-
    2 XENIX root 3c Recupero Partit 83 Linux c4 DRDOS/sec (FAT-
    3 XENIX usr 40 Venix 80286 84 C nascosto OS/2 c6 DRDOS/sec (FAT-
    4 FAT16 <32M 41 PPC PReP Boot 85 Linux esteso c7 Syrinx
    5 Esteso 42 SFS 86 set volume NTFS da Non-FS data
    6 FAT16 4d QNX4.x 87 set volume NTFS db CP/M / CTOS / .
    7 HPFS/NTFS 4e QNX4.x 2a parti 88 Linux plaintext de Dell Utility
    8 AIX 4f QNX4.x 3rd part 8e Linux LVM df BootIt
    9 AIX avviabile 50 OnTrack DM 93 Amoeba e1 accesso DOS
    a OS/2 Boot Manag 51 OnTrack DM6 Aux 94 Amoeba BBT e3 DOS R/O
    b W95 FAT32 52 CP/M 9f BSD/OS e4 SpeedStor
    c W95 FAT32 (LBA) 53 OnTrack DM6 Aux a0 Ibernazione IBM eb BeOS fs
    e W95 FAT16 (LBA) 54 OnTrackDM6 a5 FreeBSD ee GPT
    f W95 Esteso (LBA 55 EZ-Drive a6 OpenBSD ef EFI (FAT-12/16/
    Codice esadecimale (digitare L per elencare i codici): 6
    Modificato il tipo di sistema della partizione 1 in 6 (FAT16)

    Comando (m per richiamare la guida): w
    La tabella delle partizioni Ŕ stata alterata!

    Chiamata di ioctl() per rileggere la tabella delle partizioni.

    ATTENZIONE: in caso di creazione o modifica di partizioni DOS 6.x,
    consultare la pagina del manuale fdisk per ulteriori
    informazioni.
    Sincronizzazione dei dischi in corso.
     

    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.35-22-generic (buildd@vernadsky) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC 2010 (Ubuntu 2.6.35-22.35-generic 2.6.35.4)
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
    [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000001bea0000 (usable)
    [ 0.000000] BIOS-e820: 000000001bea0000 - 000000001beaf000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000001beaf000 - 000000001bf00000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000001bf00000 - 0000000020000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.3 present.
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x1bea0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DBFFF uncachable
    [ 0.000000] DC000-DFFFF write-protect
    [ 0.000000] E0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FFE0000000 write-back
    [ 0.000000] 1 base 001C000000 mask FFFC000000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] modified physical RAM map:
    [ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved)
    [ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable)
    [ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved)
    [ 0.000000] modified: 0000000000010000 - 000000000009b800 (usable)
    [ 0.000000] modified: 000000000009b800 - 00000000000a0000 (reserved)
    [ 0.000000] modified: 00000000000d0000 - 0000000000100000 (reserved)
    [ 0.000000] modified: 0000000000100000 - 000000001bea0000 (usable)
    [ 0.000000] modified: 000000001bea0000 - 000000001beaf000 (ACPI data)
    [ 0.000000] modified: 000000001beaf000 - 000000001bf00000 (ACPI NVS)
    [ 0.000000] modified: 000000001bf00000 - 0000000020000000 (reserved)
    [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
    [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] found SMP MP-table at [c00f7f00] f7f00
    [ 0.000000] init_memory_mapping: 0000000000000000-000000001bea0000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 001bc00000 page 2M
    [ 0.000000] 001bc00000 - 001bea0000 page 4k
    [ 0.000000] kernel direct mapping tables up to 1bea0000 @ 15000-1a000
    [ 0.000000] RAMDISK: 144f5000 - 14f38000
    [ 0.000000] ACPI: RSDP 000f7ed0 00014 (v00 PTLTD )
    [ 0.000000] ACPI: RSDT 1beaa446 00034 (v01 PTLTD RSDT 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 1beaedff 00074 (v01 FUJ W37 06040000 W37 000F4240)
    [ 0.000000] ACPI: DSDT 1beaa47a 04985 (v01 FUJ W37 06040000 MSFT 0100000E)
    [ 0.000000] ACPI: FACS 1beaffc0 00040
    [ 0.000000] ACPI: SSDT 1beaee73 000F7 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
    [ 0.000000] ACPI: APIC 1beaef6a 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000)
    [ 0.000000] ACPI: MCFG 1beaefc4 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 0MB HIGHMEM available.
    [ 0.000000] 446MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 1bea0000
    [ 0.000000] low ram: 0 - 1bea0000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000001 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x0001bea0
    [ 0.000000] HighMem empty
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[3] active PFN ranges
    [ 0.000000] 0: 0x00000001 -> 0x00000002
    [ 0.000000] 0: 0x00000010 -> 0x0000009b
    [ 0.000000] 0: 0x00000100 -> 0x0001bea0
    [ 0.000000] On node 0 totalpages: 114220
    [ 0.000000] free_area_init_node: node 0, pgdat c07ffd40, node_mem_map c1001020
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3948 pages, LIFO batch:0
    [ 0.000000] Normal zone: 862 pages used for memmap
    [ 0.000000] Normal zone: 109378 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] SB4X0 revision 0x11
    [ 0.000000] Ignoring ACPI timer override.
    [ 0.000000] If you got timer trouble try acpi_use_timer_override
    [ 0.000000] ACPI: PM-Timer IO Port: 0x8008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
    [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
    [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
    [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
    [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s36416 r0 d20928 u4194304
    [ 0.000000] pcpu-alloc: s36416 r0 d20928 u4194304 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113326
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=90413d4c-cb81-4a6c-8ca7-3e4496a7517b ro quiet splash
    [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.000000] Enabling fast FPU save and restore... done.
    [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2286700 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Subtract (46 early reservations)
    [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
    [ 0.000000] #2 [0000100000 - 00009a0adc] TEXT DATA BSS
    [ 0.000000] #3 [00144f5000 - 0014f38000] RAMDISK
    [ 0.000000] #4 [00009a1000 - 00009a4138] BRK
    [ 0.000000] #5 [00000f7f10 - 0000100000] BIOS reserved
    [ 0.000000] #6 [00000f7f00 - 00000f7f10] MP-table mpf
    [ 0.000000] #7 [000009b800 - 000009bd70] BIOS reserved
    [ 0.000000] #8 [000009beb0 - 00000f7f00] BIOS reserved
    [ 0.000000] #9 [000009bd70 - 000009beb0] MP-table mpc
    [ 0.000000] #10 [0000010000 - 0000011000] TRAMPOLINE
    [ 0.000000] #11 [0000011000 - 0000015000] ACPI WAKEUP
    [ 0.000000] #12 [0000015000 - 0000016000] PGTABLE
    [ 0.000000] #13 [0001000000 - 0001001000] BOOTMEM
    [ 0.000000] #14 [0001001000 - 0001381000] BOOTMEM
    [ 0.000000] #15 [0001381000 - 0001381004] BOOTMEM
    [ 0.000000] #16 [0001381040 - 0001381100] BOOTMEM
    [ 0.000000] #17 [0001381100 - 000138112c] BOOTMEM
    [ 0.000000] #18 [0001381140 - 0001382940] BOOTMEM
    [ 0.000000] #19 [0001382940 - 0001382967] BOOTMEM
    [ 0.000000] #20 [0001382980 - 0001382aec] BOOTMEM
    [ 0.000000] #21 [0001382b00 - 0001382b40] BOOTMEM
    [ 0.000000] #22 [0001382b40 - 0001382b80] BOOTMEM
    [ 0.000000] #23 [0001382b80 - 0001382bc0] BOOTMEM
    [ 0.000000] #24 [0001382bc0 - 0001382c00] BOOTMEM
    [ 0.000000] #25 [0001382c00 - 0001382c40] BOOTMEM
    [ 0.000000] #26 [0001382c40 - 0001382c80] BOOTMEM
    [ 0.000000] #27 [0001382c80 - 0001382cc0] BOOTMEM
    [ 0.000000] #28 [0001382cc0 - 0001382d00] BOOTMEM
    [ 0.000000] #29 [0001382d00 - 0001382d40] BOOTMEM
    [ 0.000000] #30 [0001382d40 - 0001382d80] BOOTMEM
    [ 0.000000] #31 [0001382d80 - 0001382d90] BOOTMEM
    [ 0.000000] #32 [0001382dc0 - 0001382dd0] BOOTMEM
    [ 0.000000] #33 [0001382e00 - 0001382e6a] BOOTMEM
    [ 0.000000] #34 [0001382e80 - 0001382eea] BOOTMEM
    [ 0.000000] #35 [0001400000 - 000140e000] BOOTMEM
    [ 0.000000] #36 [0001384f00 - 0001384f04] BOOTMEM
    [ 0.000000] #37 [0001384f40 - 0001384f44] BOOTMEM
    [ 0.000000] #38 [0001384f80 - 0001384f84] BOOTMEM
    [ 0.000000] #39 [0001384fc0 - 0001384fc4] BOOTMEM
    [ 0.000000] #40 [0001385000 - 00013850b0] BOOTMEM
    [ 0.000000] #41 [00013850c0 - 0001385168] BOOTMEM
    [ 0.000000] #42 [0001382f00 - 0001384f00] BOOTMEM
    [ 0.000000] #43 [0001385180 - 00013c5180] BOOTMEM
    [ 0.000000] #44 [00013c5180 - 00013e5180] BOOTMEM
    [ 0.000000] #45 [000140e000 - 000163c46c] BOOTMEM
    [ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
    [ 0.000000] Memory: 431208k/457344k available (4928k kernel code, 25672k reserved, 2336k data, 684k init, 0k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xdc6a0000 - 0xff7fe000 ( 561 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xdbea0000 ( 446 MB)
    [ 0.000000] .init : 0xc0819000 - 0xc08c4000 ( 684 kB)
    [ 0.000000] .data : 0xc05d030e - 0xc0818668 (2336 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc05d030e (4928 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304 nr_irqs:256
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 800.085 MHz processor.
    [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.17 BogoMIPS (lpj=3200340)
    [ 0.004025] pid_max: default: 32768 minimum: 301
    [ 0.004074] Security Framework initialized
    [ 0.004140] AppArmor: AppArmor initialized
    [ 0.004146] Yama: becoming mindful.
    [ 0.004313] Mount-cache hash table entries: 512
    [ 0.004618] Initializing cgroup subsys ns
    [ 0.004628] Initializing cgroup subsys cpuacct
    [ 0.004642] Initializing cgroup subsys memory
    [ 0.004668] Initializing cgroup subsys devices
    [ 0.004678] Initializing cgroup subsys freezer
    [ 0.004686] Initializing cgroup subsys net_cls
    [ 0.004748] mce: CPU supports 5 MCE banks
    [ 0.004783] Performance Events: AMD PMU driver.
    [ 0.004829] ... version: 0
    [ 0.004836] ... bit width: 48
    [ 0.004843] ... generic registers: 4
    [ 0.004850] ... value mask: 0000ffffffffffff
    [ 0.004858] ... max period: 00007fffffffffff
    [ 0.004866] ... fixed-purpose events: 0
    [ 0.004873] ... event mask: 000000000000000f
    [ 0.009886] SMP alternatives: switching to UP code
    [ 0.029794] Freeing SMP alternatives: 24k freed
    [ 0.029840] ACPI: Core revision 20100428
    [ 0.044022] ftrace: converting mcount calls to 0f 1f 44 00 00
    [ 0.044037] ftrace: allocating 21758 entries in 43 pages
    [ 0.048157] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.048577] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
    [ 0.088848] CPU0: Mobile AMD Sempron(tm) Processor 3400+ stepping 02
    [ 0.092000] Brought up 1 CPUs
    [ 0.092000] Total of 1 processors activated (1600.17 BogoMIPS).
    [ 0.092000] devtmpfs: initialized
    [ 0.092000] regulator: core version 0.5
    [ 0.092000] Time: 10:30:58 Date: 11/22/10
    [ 0.092000] NET: Registered protocol family 16
    [ 0.092310] EISA bus registered
    [ 0.092323] node 0 link 0: io port [1000, fffff]
    [ 0.092334] TOM: 0000000020000000 aka 512M
    [ 0.092343] node 0 link 0: mmio [a0000, bffff]
    [ 0.092352] node 0 link 0: mmio [f0000000, ffffffff]
    [ 0.092360] node 0 link 0: mmio [e0000000, efffffff]
    [ 0.092368] node 0 link 0: mmio [20000000, dfffffff]
    [ 0.092376] bus: [00, ff] on node 0 link 0
    [ 0.092384] bus: 00 index 0 [io 0x0000-0xffff]
    [ 0.092391] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    [ 0.092397] bus: 00 index 2 [mem 0x20000000-0xffffffff]
    [ 0.092416] ACPI: bus type pci registered
    [ 0.092575] PCI: MMCONFIG for domain 0000 [bus 00-01] at [mem 0xe0000000-0xe01fffff] (base 0xe0000000)
    [ 0.092583] PCI: not using MMCONFIG
    [ 0.119063] PCI: PCI BIOS revision 2.10 entry at 0xfd69c, last bus=2
    [ 0.119069] PCI: Using configuration type 1 for base access
    [ 0.121637] bio: create slab <bio-0> at 0
    [ 0.123563] ACPI: EC: Look up EC in DSDT
    [ 0.168171] ACPI: Interpreter enabled
    [ 0.168180] ACPI: (supports S0 S3 S4 S5)
    [ 0.168224] ACPI: Using IOAPIC for interrupt routing
    [ 0.168530] PCI: MMCONFIG for domain 0000 [bus 00-01] at [mem 0xe0000000-0xe01fffff] (base 0xe0000000)
    [ 0.169246] PCI: MMCONFIG at [mem 0xe0000000-0xe01fffff] reserved in ACPI motherboard resources
    [ 0.169253] PCI: Using MMCONFIG for extended config space
    [ 0.208401] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
    [ 0.208813] ACPI: No dock devices found.
    [ 0.208823] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.210931] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.215087] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.215097] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d1fff] (ignored)
    [ 0.215104] pci_root PNP0A03:00: host bridge window [mem 0x000d2000-0x000d3fff] (ignored)
    [ 0.215112] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d5fff] (ignored)
    [ 0.215120] pci_root PNP0A03:00: host bridge window [mem 0x000d6000-0x000d7fff] (ignored)
    [ 0.215127] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000d9fff] (ignored)
    [ 0.215135] pci_root PNP0A03:00: host bridge window [mem 0x000da000-0x000dbfff] (ignored)
    [ 0.215143] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e1fff] (ignored)
    [ 0.215150] pci_root PNP0A03:00: host bridge window [mem 0x000e2000-0x000e3fff] (ignored)
    [ 0.215158] pci_root PNP0A03:00: host bridge window [mem 0x000e4000-0x000e5fff] (ignored)
    [ 0.215165] pci_root PNP0A03:00: host bridge window [mem 0x000e6000-0x000e7fff] (ignored)
    [ 0.215174] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffffffff] (ignored)
    [ 0.215182] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.215189] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.215390] pci 0000:00:13.0: reg 10: [mem 0xd0000000-0xd0000fff]
    [ 0.215528] pci 0000:00:13.1: reg 10: [mem 0xd0001000-0xd0001fff]
    [ 0.215676] pci 0000:00:13.2: reg 10: [mem 0xd0002000-0xd0002fff]
    [ 0.215772] pci 0000:00:13.2: supports D1 D2
    [ 0.215778] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.215788] pci 0000:00:13.2: PME# disabled
    [ 0.215862] pci 0000:00:14.0: reg 10: [io 0x8400-0x840f]
    [ 0.215879] pci 0000:00:14.0: reg 14: [mem 0xd0003000-0xd00033ff]
    [ 0.215931] HPET not enabled in BIOS. You might try hpet=force boot option
    [ 0.216027] pci 0000:00:14.1: reg 10: [io 0x8430-0x8437]
    [ 0.216041] pci 0000:00:14.1: reg 14: [io 0x8424-0x8427]
    [ 0.216056] pci 0000:00:14.1: reg 18: [io 0x8428-0x842f]
    [ 0.216071] pci 0000:00:14.1: reg 1c: [io 0x8420-0x8423]
    [ 0.216086] pci 0000:00:14.1: reg 20: [io 0x8410-0x841f]
    [ 0.216347] pci 0000:00:14.5: reg 10: [mem 0xd0003400-0xd00034ff]
    [ 0.216484] pci 0000:00:14.6: reg 10: [mem 0xd0003800-0xd00038ff]
    [ 0.216762] PCI: peer root bus 00 res updated from pci conf
    [ 0.216829] pci 0000:01:05.0: reg 10: [mem 0xd4000000-0xd7ffffff pref]
    [ 0.216839] pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff]
    [ 0.216849] pci 0000:01:05.0: reg 18: [mem 0xd0100000-0xd010ffff]
    [ 0.216871] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.216891] pci 0000:01:05.0: supports D1 D2
    [ 0.216927] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.216937] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
    [ 0.216947] pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
    [ 0.216958] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd7ffffff 64bit pref]
    [ 0.217051] pci 0000:02:05.0: reg 10: [mem 0xd0200000-0xd020ffff]
    [ 0.217225] pci 0000:02:09.0: reg 10: [mem 0x00000000-0x00000fff]
    [ 0.217269] pci 0000:02:09.0: supports D1 D2
    [ 0.217275] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.217285] pci 0000:02:09.0: PME# disabled
    [ 0.217358] pci 0000:02:09.2: reg 10: [mem 0xd0216000-0xd02167ff]
    [ 0.217375] pci 0000:02:09.2: reg 14: [mem 0xd0210000-0xd0213fff]
    [ 0.217471] pci 0000:02:09.2: supports D1 D2
    [ 0.217477] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot
    [ 0.217488] pci 0000:02:09.2: PME# disabled
    [ 0.217552] pci 0000:02:09.3: reg 10: [mem 0xd0214000-0xd0215fff]
    [ 0.217655] pci 0000:02:09.3: supports D1 D2
    [ 0.217661] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot
    [ 0.217671] pci 0000:02:09.3: PME# disabled
    [ 0.217755] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
    [ 0.217772] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.217783] pci 0000:00:14.4: bridge window [mem 0xd0200000-0xd02fffff]
    [ 0.217794] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.217802] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.217810] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.217818] pci 0000:00:14.4: bridge window [mem 0x20000000-0xffffffff] (subtractive decode)
    [ 0.217903] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-02]
    [ 0.217926] pci_bus 0000:00: on NUMA node 0
    [ 0.217935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.218209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [ 0.218389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    [ 0.225031] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
    [ 0.225245] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
    [ 0.225451] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
    [ 0.225675] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
    [ 0.225882] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
    [ 0.226087] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
    [ 0.226292] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
    [ 0.226497] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
    [ 0.226587] HEST: Table is not found!
    [ 0.226804] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks= none
    [ 0.226815] vgaarb: loaded
    [ 0.227227] SCSI subsystem initialized
    [ 0.227371] libata version 3.00 loaded.
    [ 0.227507] usbcore: registered new interface driver usbfs
    [ 0.227539] usbcore: registered new interface driver hub
    [ 0.227601] usbcore: registered new device driver usb
    [ 0.228146] ACPI: WMI: Mapper loaded
    [ 0.228151] PCI: Using ACPI for IRQ routing
    [ 0.228161] PCI: pci_cache_line_size set to 64 bytes
    [ 0.228307] reserve RAM buffer: 0000000000002000 - 000000000000ffff
    [ 0.228314] reserve RAM buffer: 000000000009b800 - 000000000009ffff
    [ 0.228320] reserve RAM buffer: 000000001bea0000 - 000000001bffffff
    [ 0.228549] NetLabel: Initializing
    [ 0.228554] NetLabel: domain hash size = 128
    [ 0.228558] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.228589] NetLabel: unlabeled traffic allowed by default
    [ 0.228729] Switching to clocksource tsc
    [ 0.252900] AppArmor: AppArmor Filesystem Enabled
    [ 0.252938] pnp: PnP ACPI init
    [ 0.252982] ACPI: bus type pnp registered
    [ 0.257830] pnp 00:09: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [ 0.263425] pnp: PnP ACPI: found 10 devices
    [ 0.263430] ACPI: ACPI bus type pnp unregistered
    [ 0.263438] PnPBIOS: Disabled by ACPI PNP
    [ 0.263466] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.263475] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.263484] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.263501] system 00:08: [io 0x1080] has been reserved
    [ 0.263509] system 00:08: [io 0x1200-0x120f] has been reserved
    [ 0.263517] system 00:08: [io 0x040b] has been reserved
    [ 0.263524] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.263562] system 00:08: [io 0x04d6] has been reserved
    [ 0.263570] system 00:08: [io 0x0c00-0x0c01] has been reserved
    [ 0.263577] system 00:08: [io 0x0c14] has been reserved
    [ 0.263585] system 00:08: [io 0x0c50-0x0c52] has been reserved
    [ 0.263592] system 00:08: [io 0x0c6c] has been reserved
    [ 0.263599] system 00:08: [io 0x0c6f] has been reserved
    [ 0.263607] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.263614] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.263622] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.263630] system 00:08: [io 0x8000-0x805f] has been reserved
    [ 0.263638] system 00:08: [io 0x8100-0x81ff window] has been reserved
    [ 0.263646] system 00:08: [io 0x8200-0x82ff window] has been reserved
    [ 0.263654] system 00:08: [io 0x0f40-0x0f47] has been reserved
    [ 0.263662] system 00:08: [io 0x087f] has been reserved
    [ 0.263676] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.263684] system 00:09: [mem 0xfff80000-0xffffffff] has been reserved
    [ 0.302116] pci 0000:00:14.4: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
    [ 0.302128] pci 0000:00:14.4: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.302138] pci 0000:01:05.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref]
    [ 0.302147] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.302154] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
    [ 0.302163] pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
    [ 0.302172] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd7ffffff 64bit pref]
    [ 0.302186] pci 0000:02:09.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
    [ 0.302195] pci 0000:02:09.0: BAR 16: assigned [mem 0x24000000-0x27ffffff]
    [ 0.302203] pci 0000:02:09.0: BAR 0: assigned [mem 0xd0217000-0xd0217fff]
    [ 0.302217] pci 0000:02:09.0: BAR 0: set to [mem 0xd0217000-0xd0217fff] (PCI address [0xd0217000-0xd0217fff]
    [ 0.302226] pci 0000:02:09.0: BAR 13: assigned [io 0x2000-0x20ff]
    [ 0.302234] pci 0000:02:09.0: BAR 14: assigned [io 0x2400-0x24ff]
    [ 0.302241] pci 0000:02:09.0: CardBus bridge to [bus 03-06]
    [ 0.302248] pci 0000:02:09.0: bridge window [io 0x2000-0x20ff]
    [ 0.302259] pci 0000:02:09.0: bridge window [io 0x2400-0x24ff]
    [ 0.302271] pci 0000:02:09.0: bridge window [mem 0x20000000-0x23ffffff pref]
    [ 0.302283] pci 0000:02:09.0: bridge window [mem 0x24000000-0x27ffffff]
    [ 0.302294] pci 0000:00:14.4: PCI bridge to [bus 02-02]
    [ 0.302302] pci 0000:00:14.4: bridge window [io 0x2000-0x2fff]
    [ 0.302314] pci 0000:00:14.4: bridge window [mem 0xd0200000-0xd02fffff]
    [ 0.302325] pci 0000:00:14.4: bridge window [mem 0x20000000-0x23ffffff pref]
    [ 0.302380] alloc irq_desc for 20 on node -1
    [ 0.302385] alloc kstat_irqs on node -1
    [ 0.302402] pci 0000:02:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 0.302416] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.302423] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    [ 0.302431] pci_bus 0000:00: resource 6 [mem 0x20000000-0xffffffff]
    [ 0.302438] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
    [ 0.302445] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff]
    [ 0.302452] pci_bus 0000:01: resource 2 [mem 0xd4000000-0xd7ffffff 64bit pref]
    [ 0.302460] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.302467] pci_bus 0000:02: resource 1 [mem 0xd0200000-0xd02fffff]
    [ 0.302474] pci_bus 0000:02: resource 2 [mem 0x20000000-0x23ffffff pref]
    [ 0.302481] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
    [ 0.302488] pci_bus 0000:02: resource 5 [mem 0x000a0000-0x000bffff]
    [ 0.302496] pci_bus 0000:02: resource 6 [mem 0x20000000-0xffffffff]
    [ 0.302503] pci_bus 0000:03: resource 0 [io 0x2000-0x20ff]
    [ 0.302509] pci_bus 0000:03: resource 1 [io 0x2400-0x24ff]
    [ 0.302516] pci_bus 0000:03: resource 2 [mem 0x20000000-0x23ffffff pref]
    [ 0.302524] pci_bus 0000:03: resource 3 [mem 0x24000000-0x27ffffff]
    [ 0.302617] NET: Registered protocol family 2
    [ 0.302751] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.303224] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.303426] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.303616] TCP: Hash tables configured (established 16384 bind 16384)
    [ 0.303623] TCP reno registered
    [ 0.303631] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [ 0.303651] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [ 0.303820] NET: Registered protocol family 1
    [ 0.303848] pci 0000:00:00.0: MSI quirk detected; MSI disabled
    [ 0.303862] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
    [ 0.731299] pci 0000:01:05.0: Boot video device
    [ 0.731320] PCI: CLS mismatch (32 != 64), using 64 bytes
    [ 0.731733] cpufreq-nforce2: No nForce2 chipset.
    [ 0.731811] Scanning for low memory corruption every 60 seconds
    [ 0.732150] audit: initializing netlink socket (disabled)
    [ 0.732175] type=2000 audit(1290421858.727:1): initialized
    [ 0.760301] Trying to unpack rootfs image as initramfs...
    [ 0.792259] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.800004] VFS: Disk quotas dquot_6.5.2
    [ 0.800197] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.801662] fuse init (API version 7.14)
    [ 0.801903] msgmni has been set to 842
    [ 0.808112] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.808122] io scheduler noop registered
    [ 0.808127] io scheduler deadline registered
    [ 0.808163] io scheduler cfq registered (default)
    [ 0.808451] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.808510] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.815755] ACPI: AC Adapter [ADP1] (on-line)
    [ 0.815926] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
    [ 0.821300] ACPI: Lid Switch [LID0]
    [ 0.821463] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
    [ 0.821477] ACPI: Sleep Button [SLPB]
    [ 0.821621] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [ 0.821630] ACPI: Power Button [PWRF]
    [ 0.821936] ACPI: acpi_idle registered with cpuidle
    [ 0.822012] Marking TSC unstable due to TSC halts in idle
    [ 0.830945] Switching to clocksource acpi_pm
    [ 0.898008] thermal LNXTHERM:01: registered as thermal_zone0
    [ 0.898036] ACPI: Thermal Zone [TZS0] (31 C)
    [ 0.925574] thermal LNXTHERM:02: registered as thermal_zone1
    [ 0.925602] ACPI: Thermal Zone [TZS2] (30 C)
    [ 0.925811] ERST: Table is not found!
    [ 0.926184] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [ 0.926905] alloc irq_desc for 17 on node -1
    [ 0.926912] alloc kstat_irqs on node -1
    [ 0.926929] serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 0.926942] serial 0000:00:14.6: PCI INT B disabled
    [ 0.929674] brd: module loaded
    [ 0.930938] loop: module loaded
    [ 0.931506] alloc irq_desc for 16 on node -1
    [ 0.931512] alloc kstat_irqs on node -1
    [ 0.931530] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.931621] pata_acpi 0000:00:14.1: setting latency timer to 64
    [ 0.936775] Fixed MDIO Bus: probed
    [ 0.936875] PPP generic driver version 2.4.2
    [ 0.937023] tun: Universal TUN/TAP device driver, 1.6
    [ 0.937028] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [ 0.937226] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.937284] alloc irq_desc for 19 on node -1
    [ 0.937289] alloc kstat_irqs on node -1
    [ 0.937306] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 0.937350] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 0.937437] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
    [ 0.937549] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0002000
    [ 0.937651] isapnp: Scanning for PnP cards...
    [ 0.948446] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 0.948825] hub 1-0:1.0: USB hub found
    [ 0.948837] hub 1-0:1.0: 8 ports detected
    [ 0.949028] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.949067] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 0.949110] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 0.949201] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
    [ 0.949243] ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0000000
    [ 1.011344] hub 2-0:1.0: USB hub found
    [ 1.011363] hub 2-0:1.0: 4 ports detected
    [ 1.011520] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 1.011560] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [ 1.011650] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
    [ 1.011694] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0001000
    [ 1.096390] hub 3-0:1.0: USB hub found
    [ 1.096409] hub 3-0:1.0: 4 ports detected
    [ 1.096577] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.096784] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 1.097207] i8042.c: Detected active multiplexing controller, rev 1.1.
    [ 1.097326] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.097342] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.097415] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.097477] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.097543] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.097826] mice: PS/2 mouse device common for all mice
    [ 1.098210] rtc_cmos 00:04: RTC can wake from S4
    [ 1.098307] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 1.098350] rtc0: alarms up to one month, 114 bytes nvram
    [ 1.098662] device-mapper: uevent: version 1.0.3
    [ 1.102543] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
    [ 1.103582] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
    [ 1.106754] device-mapper: multipath: version 1.1.1 loaded
    [ 1.106763] device-mapper: multipath round-robin: version 1.0.0 loaded
    [ 1.109159] EISA: Probing bus 0 at eisa.0
    [ 1.109168] EISA: Cannot allocate resource for mainboard
    [ 1.109175] Cannot allocate resource for EISA slot 1
    [ 1.109182] Cannot allocate resource for EISA slot 2
    [ 1.109188] Cannot allocate resource for EISA slot 3
    [ 1.109194] Cannot allocate resource for EISA slot 4
    [ 1.109200] Cannot allocate resource for EISA slot 5
    [ 1.109206] Cannot allocate resource for EISA slot 6
    [ 1.109212] Cannot allocate resource for EISA slot 7
    [ 1.109218] Cannot allocate resource for EISA slot 8
    [ 1.109223] EISA: Detected 0 cards.
    [ 1.112773] cpuidle: using governor ladder
    [ 1.112939] cpuidle: using governor menu
    [ 1.113647] TCP cubic registered
    [ 1.113998] NET: Registered protocol family 10
    [ 1.114910] lo: Disabled Privacy Extensions
    [ 1.115625] NET: Registered protocol family 17
    [ 1.115701] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3400+ (1 cpu cores) (version 2.20.00)
    [ 1.115804] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8
    [ 1.115811] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa
    [ 1.115817] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0xc
    [ 1.115823] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x18
    [ 1.152219] Using IPI No-Shortcut mode
    [ 1.152372] PM: Resume from disk failed.
    [ 1.152386] registered taskstats version 1
    [ 1.152629] Magic number: 2:222:528
    [ 1.152762] rtc_cmos 00:04: setting system clock to 2010-11-22 10:30:59 UTC (1290421859)
    [ 1.152766] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [ 1.152767] EDD information not available.
    [ 1.494476] ACPI: Battery Slot [BAT0] (battery present)
    [ 1.582852] Freeing initrd memory: 10508k freed
    [ 1.639616] isapnp: No Plug & Play device found
    [ 1.639642] Freeing unused kernel memory: 684k freed
    [ 1.640594] Write protecting the kernel text: 4932k
    [ 1.640626] Write protecting the kernel read-only data: 1976k
    [ 1.664392] udev[65]: starting version 163
    [ 1.748241] usb 2-1: new full speed USB device using ohci_hcd and address 2
    [ 1.963799] scsi0 : pata_atiixp
    [ 1.971528] scsi1 : pata_atiixp
    [ 1.972810] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
    [ 1.972813] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
    [ 2.137261] ata2.00: ATAPI: _NEC DVD+/-RW ND-6650A, 1.42, max UDMA/33
    [ 2.137569] ata1.00: ATA-6: ST960821A, 3.05, max UDMA/100
    [ 2.137572] ata1.00: 117210240 sectors, multi 16: LBA48
    [ 2.153110] ata2.00: configured for UDMA/33
    [ 2.153410] ata1.00: configured for UDMA/100
    [ 2.153556] scsi 0:0:0:0: Direct-Access ATA ST960821A 3.05 PQ: 0 ANSI: 5
    [ 2.153759] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 2.153853] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
    [ 2.154084] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.154088] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.154109] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.154262] sda:
    [ 2.163446] scsi 1:0:0:0: CD-ROM _NEC DVD+-RW ND-6650A 1.42 PQ: 0 ANSI: 5
    [ 2.180531] sda1 sda2 <sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    [ 2.189809] Uniform CD-ROM driver Revision: 3.20
    [ 2.189960] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 2.190034] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [ 2.208182] sda5 >
    [ 2.208967] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.217708] firewire_ohci 0000:02:09.2: PCI INT C -> GSI 21 (level, low) -> IRQ 9
    [ 2.272097] firewire_ohci: Added fw-ohci device 0000:02:09.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
    [ 2.649460] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.772164] firewire_core: created device fw0: GUID 000ae405411068b5, S400
    [ 17.295352] Adding 1533948k swap on /dev/sda5. Priority:-1 extents:1 across:1533948k
    [ 17.309115] udev[323]: starting version 163
    [ 17.385535] lp: driver loaded but no devices found
    [ 17.555271] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 17.615933] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0
    [ 17.890450] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:1a/LNXVIDEO:01/input/input4
    [ 17.890528] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 17.972304] yenta_cardbus 0000:02:09.0: CardBus bridge found [1734:1092]
    [ 17.972335] yenta_cardbus 0000:02:09.0: Using CSCINT to route CSC interrupts to PCI
    [ 17.972338] yenta_cardbus 0000:02:09.0: Routing CardBus interrupts to PCI
    [ 17.972346] yenta_cardbus 0000:02:09.0: TI: mfunc 0x010a1b22, devctl 0x64
    [ 17.973476] Linux agpgart interface v0.103
    [ 18.102357] Bluetooth: Core ver 2.15
    [ 18.102391] NET: Registered protocol family 31
    [ 18.102393] Bluetooth: HCI device and connection manager initialized
    [ 18.102398] Bluetooth: HCI socket layer initialized
    [ 18.104820] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [ 18.138604] usbcore: registered new interface driver btusb
    [ 18.139696] acer-wmi: Acer Laptop ACPI-WMI Extras
    [ 18.184520] Registered led device: acer-wmi::mail
    [ 18.186101] cfg80211: Calling CRDA to update world regulatory domain
    [ 18.211821] yenta_cardbus 0000:02:09.0: ISA IRQ mask 0x0cf8, PCI irq 20
    [ 18.211828] yenta_cardbus 0000:02:09.0: Socket status: 30000006
    [ 18.211833] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
    [ 18.211847] yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
    [ 18.211851] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x20ff 0x2400-0x24ff
    [ 18.260138] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
    [ 18.266237] cfg80211: World regulatory domain updated:
    [ 18.266242] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 18.266246] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 18.266249] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 18.266252] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 18.266255] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 18.266258] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 18.284677]
    [ 18.284690] yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xd02fffff]
    [ 18.284695] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xd02fffff: excluding 0xd0200000-0xd021ffff
    [ 18.284710] yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x23ffffff pref]
    [ 18.284713] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x23ffffff: excluding 0x20000000-0x23ffffff
    [ 18.316405] type=1400 audit(1290421876.662:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=586 comm="apparmor_parser"
    [ 18.316726] type=1400 audit(1290421876.662:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=586 comm="apparmor_parser"
    [ 18.316913] type=1400 audit(1290421876.662:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=586 comm="apparmor_parser"
    [ 18.325055] tifm_7xx1 0000:02:09.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 18.335130] type=1400 audit(1290421876.678:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=597 comm="apparmor_parser"
    [ 18.344758] [drm] Initialized drm 1.1.0 20060810
    [ 18.364081] tifm_core: MMC/SD card detected in socket 0:3
    [ 18.462003] ath5k 0000:02:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 18.462073] ath5k 0000:02:05.0: registered as 'phy0'
    [ 19.037057] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
    [ 19.058523] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x408-0x40f 0x4d0-0x4d7
    [ 19.059567] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
    [ 19.076300] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
    [ 19.077112] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
    [ 19.077178] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
    [ 19.077243] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
    [ 19.077315] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
    [ 19.091704] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x92a0b1, caps: 0xa04713/0x200000/0x0
    [ 19.101959] clean.
    [ 19.123300] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
    [ 19.211502] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 19.236151] [drm] radeon defaulting to kernel modesetting.
    [ 19.236158] [drm] radeon kernel modesetting enabled.
    [ 19.236254] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 19.241402] [drm] initializing kernel modesetting (RS480 0x1002:0x5955).
    [ 19.242952] [drm] register mmio base: 0xD0100000
    [ 19.242956] [drm] register mmio size: 65536
    [ 19.243197] [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)
    [ 19.243246] [drm] Generation 2 PCI interface, using max accessible memory
    [ 19.243251] radeon 0000:01:05.0: VRAM: 64M 0x1C000000 - 0x1FFFFFFF (64M used)
    [ 19.243255] radeon 0000:01:05.0: GTT: 32M 0x20000000 - 0x21FFFFFF
    [ 19.243293] [drm] radeon: irq initialized.
    [ 19.243408] [drm] Detected VRAM RAM=64M, BAR=64M
    [ 19.243414] [drm] RAM width 128bits DDR
    [ 19.245321] [TTM] Zone kernel: Available graphics memory: 221212 kiB.
    [ 19.245325] [TTM] Initializing pool allocator.
    [ 19.245349] [drm] radeon: 64M of VRAM memory ready
    [ 19.245352] [drm] radeon: 32M of GTT memory ready.
    [ 19.245374] [drm] GART: num cpu pages 8192, num gpu pages 8192
    [ 19.245844] [drm] radeon: 3 quad pipes, 1 z pipes initialized.
    [ 19.246202] [drm] Loading R300 Microcode
    [ 19.248810] [drm] radeon: ring at 0x0000000020000000
    [ 19.248832] [drm] ring test succeeded in 1 usecs
    [ 19.248966] [drm] radeon: ib pool ready.
    [ 19.249035] [drm] ib test succeeded in 0 usecs
    [ 19.249078] [drm] Default TV standard: NTSC
    [ 19.249080] [drm] 14.318180000 MHz TV ref clk
    [ 19.249159] [drm] Panel ID String: CPT
    [ 19.249162] [drm] Panel Size 1280x800
    [ 19.249211] [drm] Default TV standard: NTSC
    [ 19.249213] [drm] 14.318180000 MHz TV ref clk
    [ 19.249243] [drm] Radeon Display Connectors
    [ 19.249245] [drm] Connector 0:
    [ 19.249246] [drm] VGA
    [ 19.249249] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
    [ 19.249251] [drm] Encoders:
    [ 19.249253] [drm] CRT1: INTERNAL_DAC2
    [ 19.249255] [drm] Connector 1:
    [ 19.249256] [drm] LVDS
    [ 19.249259] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
    [ 19.249261] [drm] Encoders:
    [ 19.249262] [drm] LCD1: INTERNAL_LVDS
    [ 19.249264] [drm] Connector 2:
    [ 19.249265] [drm] S-video
    [ 19.249267] [drm] Encoders:
    [ 19.249268] [drm] TV1: INTERNAL_DAC2
    [ 19.290737] mmc0: new SD card at address 05f5
    [ 19.326572] mmcblk0: mmc0:05f5 SD01G 982 MiB
    [ 19.326670] mmcblk0: p1
    [ 19.328580] MC'97 1 converters and GPIO not ready (0xff00)
    [ 19.330197] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 19.535611] [drm] radeon: power management initialized
    [ 19.583064] type=1400 audit(1290421877.926:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=770 comm="apparmor_parser"
    [ 19.583381] type=1400 audit(1290421877.926:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=770 comm="apparmor_parser"
    [ 19.583566] type=1400 audit(1290421877.926:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=770 comm="apparmor_parser"
    [ 19.628490] type=1400 audit(1290421877.974:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=772 comm="apparmor_parser"
    [ 19.642264] type=1400 audit(1290421877.986:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=772 comm="apparmor_parser"
    [ 19.649345] type=1400 audit(1290421877.994:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=772 comm="apparmor_parser"
    [ 19.772273] [drm] fb mappable at 0xD4040000
    [ 19.772278] [drm] vram apper at 0xD4000000
    [ 19.772280] [drm] size 4096000
    [ 19.772281] [drm] fb depth is 24
    [ 19.772283] [drm] pitch is 5120
    [ 19.820750] Console: switching to colour frame buffer device 160x50
    [ 19.826600] fb0: radeondrmfb frame buffer device
    [ 19.826602] drm: registered panic notifier
    [ 19.834945] Slow work thread pool: Starting up
    [ 19.841026] Slow work thread pool: Ready
    [ 19.841043] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:05.0 on minor 0
    [ 20.112087] Bluetooth: L2CAP ver 2.14
    [ 20.112093] Bluetooth: L2CAP socket layer initialized
    [ 20.134480] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 20.134487] Bluetooth: BNEP filters: protocol multicast
    [ 20.158640] Bluetooth: SCO (Voice Link) ver 0.6
    [ 20.158645] Bluetooth: SCO socket layer initialized
    [ 20.256176] ath: EEPROM regdomain: 0x30
    [ 20.256181] ath: EEPROM indicates we should expect a direct regpair map
    [ 20.256186] ath: Country alpha2 being used: AM
    [ 20.256188] ath: Regpair used: 0x30
    [ 20.269974] phy0: Selected rate control algorithm 'minstrel'
    [ 20.270611] ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
    [ 20.271283] cfg80211: Calling CRDA for country: AM
    [ 20.297101] cfg80211: Regulatory domain changed to country: AM
    [ 20.297108] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 20.297111] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 20.297115] (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
    [ 20.297117] (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
    [ 20.322270] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 20.325695] Bluetooth: RFCOMM TTY layer initialized
    [ 20.325702] Bluetooth: RFCOMM socket layer initialized
    [ 20.325705] Bluetooth: RFCOMM ver 1.11
    [ 20.593607] ppdev: user-space parallel port driver
    [ 23.988860] wlan0: authenticate with 00:0c:f6:26:10:6f (try 1)
    [ 23.990246] wlan0: authenticated
    [ 23.990269] wlan0: associate with 00:0c:f6:26:10:6f (try 1)
    [ 23.992483] wlan0: RX AssocResp from 00:0c:f6:26:10:6f (capab=0x411 status=0 aid=2)
    [ 23.992487] wlan0: associated
    [ 23.993029] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 26.561857] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
    [ 34.800048] wlan0: no IPv6 routers present
    [ 158.568074] usb 1-3: new high speed USB device using ehci_hcd and address 3
    [ 158.779062] Initializing USB Mass Storage driver...
    [ 158.779311] scsi2 : usb-storage 1-3:1.0
    [ 158.779697] usbcore: registered new interface driver usb-storage
    [ 158.779704] USB Mass Storage support registered.
    [ 159.789241] scsi 2:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
    [ 159.794348] sd 2:0:0:0: Attached scsi generic sg2 type 0
    [ 160.609207] sd 2:0:0:0: [sdb] 3031040 512-byte logical blocks: (1.55 GB/1.44 GiB)
    [ 160.610187] sd 2:0:0:0: [sdb] Write Protect is off
    [ 160.610196] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
    [ 160.610203] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [ 160.617073] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [ 160.617097] sdb: sdb1
    [ 160.619734] sdb: p1 size 3994377 extends beyond EOD, enabling native capacity
    [ 160.622193] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [ 160.622215] sdb: sdb1
    [ 160.624871] sdb: p1 size 3994377 extends beyond EOD, truncated
    [ 160.631082] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [ 160.631097] sd 2:0:0:0: [sdb] Attached SCSI removable disk
    [ 934.347542] usb 1-3: USB disconnect, address 3
    [ 936.244736] tifm0 : demand removing card from socket 0:3
    [ 936.244802] mmc0: card 05f5 removed
    [ 936.244955] mmcblk0: error -123 sending status comand
    [ 936.244964] mmcblk0: error -123 sending read/write command, response 0x0, card status 0x0
    [ 936.244973] mmcblk0: error -123 requesting status
    [ 936.244982] end_request: I/O error, dev mmcblk0, sector 4211
    [ 936.244990] quiet_error: 12 callbacks suppressed
    [ 936.244999] Buffer I/O error on device mmcblk0p1, logical block 3968
    [ 936.245005] lost page write due to I/O error on mmcblk0p1
    [ 941.432104] usb 1-3: new high speed USB device using ehci_hcd and address 4
    [ 941.581412] scsi3 : usb-storage 1-3:1.0
    [ 942.585222] scsi 3:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
    [ 942.590353] sd 3:0:0:0: Attached scsi generic sg2 type 0
    [ 943.407043] sd 3:0:0:0: [sdb] 3031040 512-byte logical blocks: (1.55 GB/1.44 GiB)
    [ 943.407895] sd 3:0:0:0: [sdb] Write Protect is off
    [ 943.407904] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
    [ 943.407910] sd 3:0:0:0: [sdb] Assuming drive cache: write through
    [ 943.414529] sd 3:0:0:0: [sdb] Assuming drive cache: write through
    [ 943.414553] sdb: sdb1
    [ 943.417216] sdb: p1 size 3994377 extends beyond EOD, enabling native capacity
    [ 943.419019] sd 3:0:0:0: [sdb] Assuming drive cache: write through
    [ 943.419039] sdb: sdb1
    [ 943.421693] sdb: p1 size 3994377 extends beyond EOD, truncated
    [ 943.427658] sd 3:0:0:0: [sdb] Assuming drive cache: write through
    [ 943.427674] sd 3:0:0:0: [sdb] Attached SCSI removable disk
    [ 1106.826422] sd 3:0:0:0: [sdb] Assuming drive cache: write through
    [ 1106.826447] sdb: sdb1
    [ 1106.829261] sdb: p1 size 3994377 extends beyond EOD, truncated
    Ultima modifica di DeST; 22-11-10 alle 12: 18.

    Rispondi citando Rispondi citando

  6. #25
    Data registrazione
    Aug 2010
    Sesso
    Uomo
    Messaggi
    341
    Grazie dati 
    41
    Grazie ricevuti 
    176
    Ringraziato in
    131 post

    Riferimento: Impossibile formattare SD, tentativo di recupero con testdisk

    scusa del ritardo.
    mmh,mi sa che la schedina vedendo gli output(blocchi logici)(riduzione memoria) sta passando a miglior vita,controlla il filesystem o da windows con chkdsk o da GNU/linux con:
    Codice:
    Only registered members can view code.
    cosi' senza opzione controlla solo i filesystem senza correggerlo)

    Codice:
    Only registered members can view code.
    se con l comando precedente trova degli errori con "-r" tentera' di ripararla


    cambia il dev a seconda dove la inserisci se nel lettore di memoria esterna(/dev/sdb1) o non..
    dopo questo proveremo in seguito a formattarla.

    Rispondi citando Rispondi citando

Segnalibri

Regole di scrittura

  • Tu non puoi inviare nuove discussioni
  • Tu non puoi inviare risposte
  • Tu non puoi inviare allegati
  • Tu non puoi modificare i tuoi messaggi
  •  
Cookies:direttiva 2009/136/CE (E-Privacy)

Il sito utilizza cookies propri e di terze parti per maggiori informazioni faq - Termini di servizio - Cookies
Il forum non puo' funzionare senza l'uso dei cookies pertanto l'uso della community Ŕ vincolato dall'accettazione degli stessi, nel caso contrario siete pregati di lasciare la community, proseguendo la navigazione acconsenti allĺuso dei cookie