configurazione bluetooht

**poniboy** · 02-09-10, 22: 30

mah, guarda se uso seven mi connetto tranquillamente, è la solita solfa, vorrei usare linux in definitiva, ma ogni volta mi ritrovo a dover combatter econ un milione di problematiche, peccato che sia cosi' "complicato", almeno x le utenze poco "studiate"

ma non mollo, voglio risolvere, ora vado via e ritornerò solo martedi, ma preparatevi ad un mio rompimento di scatole, xchè devo e voglio risolvere!

**poniboy** · 14-09-10, 11: 04

rieccomi. allora ho guardato "Connessione tramite cellulare bluetooth" nel link che mi ha segnalato kaos, ma nulla da fare, mi si collega e siscollega subito dopo. non capisco

altre idee?

**poniboy** · 22-09-10, 12: 58

nulla vero? pace!

**K.a.o.s.** · 22-09-10, 16: 39

Prova a postarci l'output di dmesg quando si disconnette, ma prima prova ad installare e usare blueman.

**poniboy** · 22-09-10, 17: 46

Codice:

[    0.229926] vgaarb: loaded
[    0.230090] SCSI subsystem initialized
[    0.230214] libata version 3.00 loaded.
[    0.230315] usbcore: registered new interface driver usbfs
[    0.230332] usbcore: registered new interface driver hub
[    0.230372] usbcore: registered new device driver usb
[    0.230546] ACPI: WMI: Mapper loaded
[    0.230549] PCI: Using ACPI for IRQ routing
[    0.230783] NetLabel: Initializing
[    0.230786] NetLabel:  domain hash size = 128
[    0.230788] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.230805] NetLabel:  unlabeled traffic allowed by default
[    0.230989] hpet clockevent registered
[    0.230994] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.231001] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.231008] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.236402] Switching to clocksource tsc
[    0.238725] AppArmor: AppArmor Filesystem Enabled
[    0.238749] pnp: PnP ACPI init
[    0.238772] ACPI: bus type pnp registered
[    0.241705] pnp: PnP ACPI: found 14 devices
[    0.241709] ACPI: ACPI bus type pnp unregistered
[    0.241714] PnPBIOS: Disabled by ACPI PNP
[    0.241733] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[    0.241746] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.241751] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.241755] system 00:08: ioport range 0x480-0x4bf has been reserved
[    0.241759] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.241763] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.241771] system 00:09: iomem range 0xffb80000-0xffbfffff has been reserved
[    0.241776] system 00:09: iomem range 0xfff80000-0xffffffff has been reserved
[    0.241783] system 00:0a: iomem range 0xffc00000-0xfff7ffff has been reserved
[    0.241791] system 00:0b: ioport range 0x400-0x41f has been reserved
[    0.241795] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.241800] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.241804] system 00:0b: iomem range 0xfec10000-0xfec17fff has been reserved
[    0.241808] system 00:0b: iomem range 0xfec28000-0xfec2ffff has been reserved
[    0.241816] system 00:0c: iomem range 0xe0000000-0xe3ffffff has been reserved
[    0.241824] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[    0.241828] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[    0.241832] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[    0.241836] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[    0.276667] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.276673] pci 0000:00:01.0:   IO window: disabled
[    0.276678] pci 0000:00:01.0:   MEM window: 0xf9f00000-0xfdffffff
[    0.276684] pci 0000:00:01.0:   PREFETCH window: 0x000000bdf00000-0x000000ddefffff
[    0.276691] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.276696] pci 0000:00:1c.0:   IO window: 0xc000-0xcfff
[    0.276703] pci 0000:00:1c.0:   MEM window: 0xfe000000-0xfe0fffff
[    0.276710] pci 0000:00:1c.0:   PREFETCH window: 0x00000080000000-0x000000801fffff
[    0.276719] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[    0.276723] pci 0000:00:1c.3:   IO window: 0x1000-0x1fff
[    0.276731] pci 0000:00:1c.3:   MEM window: 0xfe100000-0xfe1fffff
[    0.276737] pci 0000:00:1c.3:   PREFETCH window: 0x00000080200000-0x000000803fffff
[    0.276751] pci 0000:04:01.0: CardBus bridge, secondary bus 0000:05
[    0.276754] pci 0000:04:01.0:   IO window: 0x00d000-0x00d0ff
[    0.276760] pci 0000:04:01.0:   IO window: 0x00d400-0x00d4ff
[    0.276767] pci 0000:04:01.0:   PREFETCH window: 0x84000000-0x87ffffff
[    0.276773] pci 0000:04:01.0:   MEM window: 0x88000000-0x8bffffff
[    0.276780] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[    0.276784] pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
[    0.276791] pci 0000:00:1e.0:   MEM window: 0xfe200000-0xfeafffff
[    0.276798] pci 0000:00:1e.0:   PREFETCH window: 0x000000ddf00000-0x000000dfefffff
[    0.276824]   alloc irq_desc for 16 on node -1
[    0.276827]   alloc kstat_irqs on node -1
[    0.276837] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.276843] pci 0000:00:01.0: setting latency timer to 64
[    0.276855] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.276862] pci 0000:00:1c.0: setting latency timer to 64
[    0.276873] pci 0000:00:1c.3: enabling device (0106 -> 0107)
[    0.276878]   alloc irq_desc for 19 on node -1
[    0.276880]   alloc kstat_irqs on node -1
[    0.276885] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.276891] pci 0000:00:1c.3: setting latency timer to 64
[    0.276901] pci 0000:00:1e.0: setting latency timer to 64
[    0.276917] pci 0000:04:01.0: enabling device (0000 -> 0003)
[    0.276922]   alloc irq_desc for 17 on node -1
[    0.276925]   alloc kstat_irqs on node -1
[    0.276930] pci 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.276938] pci 0000:04:01.0: setting latency timer to 64
[    0.276945] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.276949] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.276953] pci_bus 0000:01: resource 1 mem: [0xf9f00000-0xfdffffff]
[    0.276956] pci_bus 0000:01: resource 2 pref mem [0xbdf00000-0xddefffff]
[    0.276960] pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
[    0.276964] pci_bus 0000:02: resource 1 mem: [0xfe000000-0xfe0fffff]
[    0.276968] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff]
[    0.276971] pci_bus 0000:03: resource 0 io:  [0x1000-0x1fff]
[    0.276975] pci_bus 0000:03: resource 1 mem: [0xfe100000-0xfe1fffff]
[    0.276979] pci_bus 0000:03: resource 2 pref mem [0x80200000-0x803fffff]
[    0.276983] pci_bus 0000:04: resource 0 io:  [0xd000-0xdfff]
[    0.276986] pci_bus 0000:04: resource 1 mem: [0xfe200000-0xfeafffff]
[    0.276990] pci_bus 0000:04: resource 2 pref mem [0xddf00000-0xdfefffff]
[    0.276994] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
[    0.276997] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[    0.277001] pci_bus 0000:05: resource 0 io:  [0xd000-0xd0ff]
[    0.277004] pci_bus 0000:05: resource 1 io:  [0xd400-0xd4ff]
[    0.277008] pci_bus 0000:05: resource 2 pref mem [0x84000000-0x87ffffff]
[    0.277012] pci_bus 0000:05: resource 3 mem: [0x88000000-0x8bffffff]
[    0.277065] NET: Registered protocol family 2
[    0.277203] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.277632] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.278446] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.278869] TCP: Hash tables configured (established 131072 bind 65536)
[    0.278872] TCP reno registered
[    0.279041] NET: Registered protocol family 1
[    0.279196] pci 0000:01:00.0: Boot video device
[    0.279245] Simple Boot Flag at 0x52 set to 0x1
[    0.279476] cpufreq-nforce2: No nForce2 chipset.
[    0.279514] Scanning for low memory corruption every 60 seconds
[    0.279672] audit: initializing netlink socket (disabled)
[    0.279690] type=2000 audit(1285176341.278:1): initialized
[    0.292843] highmem bounce pool size: 64 pages
[    0.292851] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.295048] VFS: Disk quotas dquot_6.5.2
[    0.295132] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.295940] fuse init (API version 7.13)
[    0.296061] msgmni has been set to 1690
[    0.296347] alg: No test for stdrng (krng)
[    0.296421] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.296425] io scheduler noop registered
[    0.296428] io scheduler anticipatory registered
[    0.296430] io scheduler deadline registered
[    0.296491] io scheduler cfq registered (default)
[    0.296678]   alloc irq_desc for 24 on node -1
[    0.296681]   alloc kstat_irqs on node -1
[    0.296693] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.296701] pcieport 0000:00:01.0: setting latency timer to 64
[    0.296835]   alloc irq_desc for 25 on node -1
[    0.296838]   alloc kstat_irqs on node -1
[    0.296847] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.296859] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.297022]   alloc irq_desc for 26 on node -1
[    0.297024]   alloc kstat_irqs on node -1
[    0.297034] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[    0.297045] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.297168] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.297306] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.297467] ACPI: AC Adapter [AC0] (on-line)
[    0.297573] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.299124] ACPI: Lid Switch [LID]
[    0.299188] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.299192] ACPI: Power Button [PWRB]
[    0.299253] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.299260] ACPI: Sleep Button [SLPB]
[    0.299317] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.299321] ACPI: Power Button [PWRF]
[    0.300429] ACPI Warning: Incorrect checksum in table [SSDT] - 83, should be EA (20090903/tbutils-314)
[    0.300439] ACPI: SSDT 7ffd7f40 00CC3 (v01    AMI   CPU1PM 00000001 INTL 20051117)
[    0.303871] Marking TSC unstable due to TSC halts in idle
[    0.303970] processor LNXCPU:00: registered as cooling_device0
[    0.304265] ACPI Warning: Incorrect checksum in table [SSDT] - B7, should be 7D (20090903/tbutils-314)
[    0.304273] ACPI: SSDT 7ffd8c10 004A4 (v01    AMI   CPU2PM 00000001 INTL 20051117)
[    0.305039] Switching to clocksource hpet
[    0.305494] processor LNXCPU:01: registered as cooling_device1
[    0.316826] thermal LNXTHERM:01: registered as thermal_zone0
[    0.316841] ACPI: Thermal Zone [THRM] (66 C)
[    0.318813] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.320704] brd: module loaded
[    0.321367] loop: module loaded
[    0.321478] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.321609] ata_piix 0000:00:1f.1: version 2.13
[    0.321630]   alloc irq_desc for 18 on node -1
[    0.321633]   alloc kstat_irqs on node -1
[    0.321642] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.321695] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.322149] scsi0 : ata_piix
[    0.322849] scsi1 : ata_piix
[    0.324712] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.324717] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.325208] Fixed MDIO Bus: probed
[    0.325258] PPP generic driver version 2.4.2
[    0.325321] tun: Universal TUN/TAP device driver, 1.6
[    0.325323] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.325432] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.325458]   alloc irq_desc for 23 on node -1
[    0.325461]   alloc kstat_irqs on node -1
[    0.325467] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.325488] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.325493] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.325544] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.325569] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.325584] ehci_hcd 0000:00:1d.7: debug port 1
[    0.329459] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.329539] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebfbc00
[    0.329980] isapnp: Scanning for PnP cards...
[    0.336005] ata2: port disabled. ignoring.
[    0.345464] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.345616] usb usb1: configuration #1 chosen from 1 choice
[    0.345655] hub 1-0:1.0: USB hub found
[    0.345667] hub 1-0:1.0: 8 ports detected
[    0.345757] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.345779] uhci_hcd: USB Universal Host Controller Interface driver
[    0.345826] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.345836] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.345841] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.345885] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.345915] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ec00
[    0.346036] usb usb2: configuration #1 chosen from 1 choice
[    0.346070] hub 2-0:1.0: USB hub found
[    0.346079] hub 2-0:1.0: 2 ports detected
[    0.346140] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.346148] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.346153] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.346193] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.346230] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
[    0.346346] usb usb3: configuration #1 chosen from 1 choice
[    0.346380] hub 3-0:1.0: USB hub found
[    0.346388] hub 3-0:1.0: 2 ports detected
[    0.346444] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.346452] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.346456] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.346499] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.346535] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[    0.346653] usb usb4: configuration #1 chosen from 1 choice
[    0.346687] hub 4-0:1.0: USB hub found
[    0.346696] hub 4-0:1.0: 2 ports detected
[    0.346755]   alloc irq_desc for 22 on node -1
[    0.346758]   alloc kstat_irqs on node -1
[    0.346765] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[    0.346773] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.346777] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.346819] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.346855] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000e480
[    0.346968] usb usb5: configuration #1 chosen from 1 choice
[    0.347002] hub 5-0:1.0: USB hub found
[    0.347011] hub 5-0:1.0: 2 ports detected
[    0.347140] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.349710] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.356168] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.358133] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.358138] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.358142] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.358146] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.358256] mice: PS/2 mouse device common for all mice
[    0.360343] rtc_cmos 00:03: RTC can wake from S4
[    0.360535] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.360570] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.360754] device-mapper: uevent: version 1.0.3
[    0.362287] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.399669] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    0.405192] device-mapper: multipath: version 1.1.0 loaded
[    0.405197] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.405417] EISA: Probing bus 0 at eisa.0
[    0.405426] Cannot allocate resource for EISA slot 1
[    0.405455] EISA: Detected 0 cards.
[    0.420860] cpuidle: using governor ladder
[    0.420986] cpuidle: using governor menu
[    0.421632] TCP cubic registered
[    0.421866] NET: Registered protocol family 10
[    0.422478] lo: Disabled Privacy Extensions
[    0.422915] NET: Registered protocol family 17
[    0.423745] Using IPI No-Shortcut mode
[    0.423871] PM: Resume from disk failed.
[    0.423888] registered taskstats version 1
[    0.424432]   Magic number: 10:848:441
[    0.424551] rtc_cmos 00:03: setting system clock to 2010-09-22 17:25:41 UTC (1285176341)
[    0.424555] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.424557] EDD information not available.
[    0.478021] Freeing initrd memory: 7781k freed
[    0.505651] ata1.00: ATA-6: HTS541080G9AT00, MB4OA60A, max UDMA/100
[    0.505657] ata1.00: 156301488 sectors, multi 16: LBA48 
[    0.505705] ata1.01: ATAPI: MATSHITADVD-RAM UJ-850S, 1.21, max UDMA/33
[    0.521554] ata1.00: configured for UDMA/100
[    0.537446] ata1.01: configured for UDMA/33
[    0.560339] ACPI: Battery Slot [BAT0] (battery present)
[    0.686857] isapnp: No Plug & Play device found
[    0.687025] scsi 0:0:0:0: Direct-Access     ATA      HTS541080G9AT00  MB4O PQ: 0 ANSI: 5
[    0.687230] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    0.687245] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.687301] sd 0:0:0:0: [sda] Write Protect is off
[    0.687305] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.687349] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.689241] scsi 0:0:1:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.21 PQ: 0 ANSI: 5
[    0.689307]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    0.754202] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.754210] Uniform CD-ROM driver Revision: 3.20
[    0.754410] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    0.754431] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.754528] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    0.754618] Freeing unused kernel memory: 660k freed
[    0.755158] Write protecting the kernel text: 4680k
[    0.755224] Write protecting the kernel read-only data: 1844k
[    0.775661] udev: starting version 151
[    0.928102] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.928133] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.928186] r8169 0000:02:00.0: setting latency timer to 64
[    0.928260]   alloc irq_desc for 27 on node -1
[    0.928262]   alloc kstat_irqs on node -1
[    0.928281] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
[    0.929120] eth0: RTL8168b/8111b at 0xf80a2000, 00:18:f3:83:3d:66, XID 18000000 IRQ 27
[    0.944050] ohci1394 0000:04:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    1.003077] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18]  MMIO=[feaff800-feafffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    1.010104] usb 1-7: new high speed USB device using ehci_hcd and address 4
[    1.142162] usb 1-7: configuration #1 chosen from 1 choice
[    1.331222] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    1.380062] usb 2-2: new low speed USB device using uhci_hcd and address 2
[    1.557176] usb 2-2: configuration #1 chosen from 1 choice
[    1.800058] usb 4-2: new full speed USB device using uhci_hcd and address 2
[    2.042778] usb 4-2: configuration #1 chosen from 1 choice
[    2.280296] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800036dd679]
[    3.616004] Adding 665592k swap on /dev/sda6.  Priority:-1 extents:1 across:665592k 
[    4.331828] udev: starting version 151
[    5.067631] type=1505 audit(1285169146.139:2):  operation="profile_load" pid=496 name="/sbin/dhclient3"
[    5.068617] type=1505 audit(1285169146.143:3):  operation="profile_load" pid=496 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    5.069052] type=1505 audit(1285169146.143:4):  operation="profile_load" pid=496 name="/usr/lib/connman/scripts/dhclient-script"
[    6.191083] usbcore: registered new interface driver hiddev
[    6.203090] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6
[    6.203208] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    6.206039] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input7
[    6.206182] generic-usb 0003:046D:C040.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0
[    6.206225] usbcore: registered new interface driver usbhid
[    6.206228] usbhid: v2.6:USB HID core driver
[    6.319571] asus_laptop: Asus Laptop Support version 0.42
[    6.323165] asus_laptop:   A6JC model detected
[    6.325973] input: Asus Laptop extra buttons as /devices/virtual/input/input8
[    6.326125] Registered led device: asus::mail
[    6.577292] Bluetooth: Core ver 2.15
[    6.577367] NET: Registered protocol family 31
[    6.577370] Bluetooth: HCI device and connection manager initialized
[    6.577374] Bluetooth: HCI socket layer initialized
[    6.588077] Linux agpgart interface v0.103
[    6.748305] cfg80211: Calling CRDA to update world regulatory domain
[    6.749690] intel_rng: FWH not detected
[    6.888820] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    6.889444] usbcore: registered new interface driver btusb
[    6.899358] Linux video capture interface: v2.00
[    6.920862] vga16fb: initializing
[    6.920867] vga16fb: mapped to 0xc00a0000
[    6.921615] fb0: VGA16 VGA frame buffer device
[    7.130811] sdhci: Secure Digital Host Controller Interface driver
[    7.130815] sdhci: Copyright(c) Pierre Ossman
[    7.144150] stkwebcam: Syntek USB2.0 Camera is now controlling video device /dev/video0
[    7.144180] usbcore: registered new interface driver stkwebcam
[    7.348552] lp: driver loaded but no devices found
[    7.717621] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[    7.755930] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[    8.938501] cfg80211: World regulatory domain updated:
[    8.938506]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.938511]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.938515]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.938518]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.938522]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.938526]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.050490] nvidia: module license 'NVIDIA' taints kernel.
[    9.050496] Disabling lock debugging due to kernel taint
[    9.603640] sdhci-pci 0000:04:01.2: SDHCI controller found [1180:0822] (rev 17)
[    9.603667] sdhci-pci 0000:04:01.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    9.605798] Registered led device: mmc0::
[    9.605911] mmc0: SDHCI controller on PCI [0000:04:01.2] using PIO
[    9.713821] yenta_cardbus 0000:04:01.0: CardBus bridge found [1043:1237]
[    9.843084] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.843107] nvidia 0000:01:00.0: setting latency timer to 64
[    9.844051] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.22  Sun Nov  8 20:26:31 PST 2009
[    9.847747] yenta_cardbus 0000:04:01.0: ISA IRQ mask 0x0cb8, PCI irq 17
[    9.847753] yenta_cardbus 0000:04:01.0: Socket status: 30000006
[    9.847757] pci_bus 0000:04: Raising subordinate bus# of parent bus (#04) from #05 to #08
[    9.847776] yenta_cardbus 0000:04:01.0: pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[    9.847780] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xdfff: clean.
[    9.848057] yenta_cardbus 0000:04:01.0: pcmcia: parent PCI bridge Memory window: 0xfe200000 - 0xfeafffff
[    9.848061] yenta_cardbus 0000:04:01.0: pcmcia: parent PCI bridge Memory window: 0xddf00000 - 0xdfefffff
[   10.094684] Console: switching to colour frame buffer device 80x30
[   10.141196] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[   10.141201] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[   10.141508] iwl3945 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   10.141524] iwl3945 0000:03:00.0: setting latency timer to 64
[   10.210894] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[   10.210899] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   10.211024]   alloc irq_desc for 28 on node -1
[   10.211027]   alloc kstat_irqs on node -1
[   10.211061] iwl3945 0000:03:00.0: irq 28 for MSI/MSI-X
[   10.864201] phy0: Selected rate control algorithm 'iwl-3945-rs'
[   11.118897] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   11.120573] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[   11.121073] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   11.121441] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   11.122237] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   12.720483]   alloc irq_desc for 21 on node -1
[   12.720488]   alloc kstat_irqs on node -1
[   12.720500] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   12.720784] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   13.094593] type=1505 audit(1285169154.169:5):  operation="profile_load" pid=804 name="/usr/share/gdm/guest-session/Xsession"
[   13.096839] type=1505 audit(1285169154.171:6):  operation="profile_replace" pid=805 name="/sbin/dhclient3"
[   13.097628] type=1505 audit(1285169154.171:7):  operation="profile_replace" pid=805 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   13.098057] type=1505 audit(1285169154.171:8):  operation="profile_replace" pid=805 name="/usr/lib/connman/scripts/dhclient-script"
[   13.141638] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[   13.331349] type=1505 audit(1285169154.403:9):  operation="profile_load" pid=806 name="/usr/bin/evince"
[   13.341249] type=1505 audit(1285169154.416:10):  operation="profile_load" pid=806 name="/usr/bin/evince-previewer"
[   13.347386] type=1505 audit(1285169154.420:11):  operation="profile_load" pid=806 name="/usr/bin/evince-thumbnailer"
[   13.376634] type=1505 audit(1285169154.448:12):  operation="profile_load" pid=810 name="/usr/lib/cups/backend/cups-pdf"
[   13.377702] type=1505 audit(1285169154.452:13):  operation="profile_load" pid=810 name="/usr/sbin/cupsd"
[   13.453832] type=1505 audit(1285169154.527:14):  operation="profile_load" pid=811 name="/usr/sbin/tcpdump"
[   16.670418] r8169: eth0: link down
[   16.670669] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.685177] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
[   16.977082] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[   17.044821] Registered led device: iwl-phy0::radio
[   17.044912] Registered led device: iwl-phy0::assoc
[   17.044955] Registered led device: iwl-phy0::RX
[   17.044996] Registered led device: iwl-phy0::TX
[   17.058275] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.661698] Bluetooth: L2CAP ver 2.14
[   18.661702] Bluetooth: L2CAP socket layer initialized
[   18.681838] Bluetooth: RFCOMM TTY layer initialized
[   18.681843] Bluetooth: RFCOMM socket layer initialized
[   18.681845] Bluetooth: RFCOMM ver 1.11
[   19.440997] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.441020] Bluetooth: BNEP filters: protocol multicast
[   19.511445] Bridge firewalling registered
[   19.518179] ppdev: user-space parallel port driver
[   19.913892] Bluetooth: SCO (Voice Link) ver 0.6
[   19.913897] Bluetooth: SCO socket layer initialized
[  169.436684] wlan0: deauthenticating from 00:24:01:71:0a:af by local choice (reason=3)
[  169.438925] wlan0: direct probe to AP 00:24:01:71:0a:af (try 1)
[  169.443532] wlan0: direct probe responded
[  169.443538] wlan0: authenticate with AP 00:24:01:71:0a:af (try 1)
[  169.445578] wlan0: authenticated
[  169.445600] wlan0: associate with AP 00:24:01:71:0a:af (try 1)
[  169.448047] wlan0: RX AssocResp from 00:24:01:71:0a:af (capab=0x411 status=0 aid=1)
[  169.448051] wlan0: associated
[  169.449707] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  179.852084] wlan0: no IPv6 routers present
[  721.701083] wlan0: deauthenticating from 00:24:01:71:0a:af by local choice (reason=3)
[  924.653418] wlan0: deauthenticating from 00:24:01:71:0a:af by local choice (reason=3)
[  924.684423] wlan0: direct probe to AP 00:24:01:71:0a:af (try 1)
[  924.884059] wlan0: direct probe to AP 00:24:01:71:0a:af (try 2)
[  925.084069] wlan0: direct probe to AP 00:24:01:71:0a:af (try 3)
[  925.129841] wlan0: direct probe responded
[  925.129853] wlan0: authenticate with AP 00:24:01:71:0a:af (try 1)
[  925.137252] wlan0: authenticated
[  925.137297] wlan0: associate with AP 00:24:01:71:0a:af (try 1)
[  925.140233] wlan0: RX AssocResp from 00:24:01:71:0a:af (capab=0x411 status=0 aid=1)
[  925.140240] wlan0: associated
[ 1120.361076] wlan0: deauthenticating from 00:24:01:71:0a:af by local choice (reason=3)
ponyboy@ponyboy-laptop:~$

blueman l'ho provatoma anche li fa lostesso lavoro

**K.a.o.s.** · 22-09-10, 18: 02

Se provi a disattivare la wireless prima?

**poniboy** · 22-09-10, 18: 14

stessa cosa purtroppo!

**K.a.o.s.** · 22-09-10, 19: 12

Ma non ho capito: sono associati? Ovvero che uno può connettersi all'altro (e si vedono entrambi magari) senza problemi e possibilmente senza richiedere l'autorizzazione? Perché prima di tutto credo vada sistemato questo.

Poi magari è sbagliata la configurazione per l'accesso a internet: la guida linkata prima dovrebbe andare bene anche per Ubuntu 10.04

**poniboy** · 23-09-10, 07: 50

Originariamente scritto da K.a.o.s.

Ma non ho capito: sono associati? Ovvero che uno può connettersi all'altro (e si vedono entrambi magari) senza problemi e possibilmente senza richiedere l'autorizzazione? Perché prima di tutto credo vada sistemato questo.

si scambiano file a vicenda, è questo il bello! sicuramente c'è qualcosa impostato male, ora ridò un occhiata alla guida e ti dico!